Zemic H8c Load Cell

H8C Load Cell

HM9B Load Cell

93% of 100
As low as $63.80
Availability: In stock
HM9B Loadcell

Zemic HM9B Load Cell


The Zemic HM9B Load Cell is one of the types of load cells produced by Zemic. This type is a dual shear beam load cell. It converts applied shear stress into an electrical signal output. It is highly recommended for applications with much electronic weighing equipment like tracks, trucks, and hoppers. It is made from nickel plated alloy steel which is durable to handle large weights.

Built Material

The Zemic HM9B is made of nickel plated alloy steel. This ensures the load cell’s improved hardness, durability, toughness, and ability to withstand corrosion. Alloy steel is also used in jet engines, nuclear power plants, and other spacecraft.


The weighing accuracy class of the Zemic HM9B load cell is OIM R60 C3. The C3 accuracy class is given to load cells with high accuracy specification. Load cells in the C3 Accuracy Class classification are mostly used with weighing machines used for mixing different construction materials like sand and cement.

Maximum Capacity                                                                                              

The maximum compression force capacity of HM9B load cells can range from 10t to 50t. Overload is allowed but to a certain extent only.

Safe Overload

The safe overload capacity of this load cell is 150% of its maximum load capacity. Exceeding 150% may put the load cell in danger of being deformed.

Ultimate Overload

The maximum overload allowed is 300% of the maximum load capacity. Exceeding 300% will deform the load cell and cause inaccurate measurements.

Common Problems

Load cells need to be properly mounted in the right position. Improper mounting of the load cells will result into wrong readings and inaccurate results. Overloading weighing device is sometimes unavoidable which may result permanent deformation of the load cell. Permanent load cell deformation will make calibration impossible. Another common problem with load cells is electrical damage. Being exposed to significant electrical currents damage the resistors in the load cells.



More Information
Insulation resistance ≥ 5000 ( at 50VDC )
Zero Range ≤ ± 1.5 %
Ultimate Load 300 %
Accuracy class OIML R60 C3
ATEX classification II1G Ex ia II1C T4 , II1D Ex iaD 20 T73°C , II3G nL IIC T4
Combined Error ≤ ± 0.023
Excitation maximum 18
Element material Alloy steel
Excitation, recommended voltage 5 ~ 12
Input resistance 700 ± 7
Maximum capacity 10, 20, 25 30, 40 SE, 40, 50 t
Ingress Protection IP68
Minimum dead load 0
Output resistance 700 ± 7
Output sensitivity 2.0 ± 0.002
Ratio of minimum LC verification interval 15000 to 7500
Maximum number of load cell intervals 3000 nlc
Temperature range, operating -35 ~ +65
Temperature range, compensated -10 ~+40
Safe overload 150 %
Write Your Own Review
You're reviewing:HM9B Load Cell
Your Rating
Product Name : HM9B Load Cell

* required fields